Hi, the search function/search button has disappeared on the iPad and iPhone. Has anyone else experienced this?

Bendik Team BoA for RP 2 days ago

💡

Feature Requests

Hi, the search function/search button has disappeared on the iPad and iPhone. Has anyone else experienced this?

Bendik Team BoA for RP 2 days ago

💡

Feature Requests

When choosing a ride only one appears on the screen at a time. Previously many rides appeared. Why???

Davidb 3 days ago

💡

Feature Requests

Using Ipad with Ios 26.5. Tacx Neo 2T running firmware 2.7. Both the latest. The Fulgaz picks up my hrm, and on the trainer the cadence and the power. But it still does NOT pick up the controller or whatever the third one is that controls the resistance going up hill vs down hill. Interestingly, it does work on my old school Garmin wheel-on Genius trainer. This has been happening since the latest version of FG. Still not usable. It’s summer here but raining and I had to pull out my old laptop and run old veloreality because FG still doesn’t work right with the trainer in NYC

JD 11 days ago

1

💡

Feature Requests

The world map on FulGaz no longer shows rides a completed ride as a blue check mark. It will show a thumb nail as completed, but it is not synced with world map.

Michael Barr 26 days ago

💡

Feature Requests

Since updating to version 7.0.6, the watts always remain at 0 watts, while the app shows, that the bike has been fully connected to the app. As the stages bike is running with the stages bike app properly, the problem must be with fulgaz. The problem occurs when using the fulgaz app via windows with my computer as well as using the app via iphone.

Frank Peter 26 days ago

1

💡

Feature Requests

The line above the workout used to show FTP with the FTP number on the left-hand side. This was really useful as when you load up a workout, you can see how hard it is by how far it goes over the FTP line (overs and unders, for example). Now, there is no way of knowing until you start, and the watts show up on the first interval.

Robbo about 1 month ago

2

💡

Feature Requests

Contributors take care to end their rides with a pleasing view. We no longer see this as rides are ending with the ride stats summary on a black background, the end of ride view is lost. Please fix this

Peter Kettle - Crazy Catz about 1 month ago

💡

Feature Requests

Running latest version of FG on Win 11, with a kickr bike. Sometimes I prefer to do workouts in SIM mode for added realism. WIth the latest upgrades, the trainer doesn’t change resistance according to gradient, and subjectively the resistance is too low — it’s very difficult to maintain even “sweet spot” power on the flat in top gear.

Ed Lazda about 1 month ago

🐛 Bug Reports

Using FulGaz v 7.0.6 with iPhone iOS 26.5 with a lightning / HDMI adapter. The decimal point of the upcoming gradient is hidden by the gradient scale.

Steve B about 1 month ago

💡

Feature Requests

When I run FulGaz 7.06 on MacOS 26.5 streaming 4k in steady mode, taking a picture stops the video. However the ride continues with the km on the bike HUD increasing. It works fine if you do not take a picture and restart Fulgaz from scratch again.

dawitika about 2 months ago

💡

Feature Requests

I am running Windows 11 Home on my PC and the FulGaz app (version 7.0.7.0) doesn’t connect to my Tacx Neo 2T trainer via bluetooth. I was able to connect to the trainer using a friend’s PC (running Windows 10) and can also connect via my iPhone. FulGaz app does recognise my heart rate monitor. Hence it appears to be a Windows 11 compatibility issue with FulGaz. Please help to find a solution.

Raj Wilson about 2 months ago

4

💡

Feature Requests

When gradient goes into three figures eg 10.1 the HUD expands in width to accommodate the extra digit. And then shrinks when gradine reduces to eg 9.9. Small but annoying glitch for riders who like to climb steep gradients.

MBB 🌱 about 2 months ago

💡

Feature Requests

I am using SB20 bike on Apple TV and I have just noticed the metres climbed on Strava is significantly less than those recorded by Fullgaz (like 80 to 60). Anybody else noticed this?

dawitika about 2 months ago

💡

Feature Requests

Did the Kingslake FTP test. Did not show the countdown clock (on screen or HUD) during the 20 min segment, although I did get the audible cues. I got the announcement that the value was updated, but when I checked it in the settings, it hadn't changed. Importing the ride into golden cheetah software, got the average power over the test segment and calculated the FTP using the Fulgaz formula. My FTP had in fact increased 5 units. Win 11, Fulgaz v7.0.7.0

KS Wxman about 2 months ago

🐛 Bug Reports

Hey Gang I currently am riding on a Saris M2 wheel on trainer using my IPad with IOS 26.4.2. When the first release version 7 of Fulgaz was released, I like many, had issues with resistance on climbs. I played around with the settings and discovered that the Real Road Feel (RRF) was the initial culprit…so I turned it off. With the new release (7.0.6) I left RRF off and had no issues up until today…..where I had no discernible resistance at all whe. I did my ride today. So I just did an hour of riding the 0.5 mile start of Puketapu Gravel ‘n Tar (it has a flat leading into a small grade and then another flat leading into a steeper grade). It was a great way to adjust my settings and do some comparison’s. I played around with max slope limit between 3% and 9% and an uphill slope scaling between 70% - 90% I did a total of 21 rides using various advanced trainer settings and here is what I discovered 1) with 7.0.6, RRF MUST be toggled on or you feel no resistance! But, here’s the weird one………I found that if you tried to ‘just’ toggle RRF back on and start the ride again you would often NOT feel the resistance you had previously when RRF was on. I tried varying the order of things I did to get the resistance to work again and what I discovered (that seemed to work) is to do this: 1) turn RRF back on 2) go into advanced trainer settings and change at least 1 of your settings….or re-input your existing settings. (I use a 4% slope limit….85% uphill scaling…100% downhill) Once I made that small change and re-started the ride I found the resistance was back! Sorry for the long winded response…..hopefully it is helpful to some of you. happy riding. Todd :-)

Todd Ford about 2 months ago

1

💡

Feature Requests

Before the recent upgrade, the averages would reset at the start of a new interval, but this no longer happens. For me, knowing the average value for an interval is useful; the average for the whole workout is not.

Ed Lazda about 2 months ago

💡

Feature Requests

The settings buttons on the screen displayed whilst riding are very close to the edge and are very small, making in ride adjustment practically difficult

Stephen about 2 months ago

💡

Feature Requests