Hi all. The issue with ERG Mode during workouts should be resolved in the very latest software update, but I’ve had varying report of success.
Could you please check to ensure you are on the latest version, then give this a test when you have time. Please leave a comment on the new Featurebase report if ERG Mode still does not work for you:
I will keep looking into this one if needed. Thanks again for your support. - Klem
Momo181
•
May 4
Just how would I access that version in order to test it? I have a Windows 11 setup.
Thirza
•
May 5
Android version 7.0.6. here, but still workouts do not work as they should. FTP stays stuck at 200 and ERG mode does not work, Watts stick around 30.
Tried reentering weight, ERG settings and FTP and such, but no effect.
I mostly ride workouts, so this makes me really sad… I understand you guys are working hard on this, but is getting very very frustrating…
Eastcoaster
•
Apr 13
My experience is very similar to Wxman.
I had to manually re-enter my weight, FTP and check off a few boxes such as ERG mode and disable ride profile during workouts. Not a big deal but when I went to do a Keen FTP workout, the FTP defaulted to 200 watts and the ERG mode didn’t seem to be responsive. The workout started at 30 watts and despite multiple intervals which should have changed the wattage it remained at 30 watts.
I looked over all the settings, shut down and started up the app again, in the end I gave up and did a ride instead of a workout.
loftsgor
•
Apr 15
Same here. Stuck at 30w. Gave up and did a ride. I do workouts most of the time, so this is big loss. Would love to rollback the update if possible.
Hermino Katzenstein
•
Apr 14
Same here.
Pls fix it asap.
thx
Eastcoaster
•
Apr 15
Tried again today this time FTP beginner rather than FTP keen workout but sadly no difference ERG mode isn’t working. Hopefully it will get fixed soon. Did a ride instead.
Liam Thurston
•
Apr 15
This has also happened to me. Using a Wahoo Kickr core. Please fix
Attempted to do one of the Keen FTP workouts. It initially shows the my FTP number with the horizontal white line in the preview, but when the ride actually stated the FTP number is way higher. It is also NOT doing the ERG mode, and could do any combo of watts/cadence in the training ride.
Any way to roll back until this gets fixed?
ZimZam
•
Apr 13
Maybe the code is looking for “EGR” instead of ERG. The setting has it as EGR. Hopefully it is something this simple. 😁
I regularly ride the Mt Martha workout but after the update the FTP is defaulting to 200 even after I changed it in my workout settings and ERG mode is not working properly. I had to abandon the workout as the resistance was only at 35W despite the workout wattage being much higher. In summary, neither FTP or ERG mode is working for me on this workout.
7.0.5 iPad iOS - Erg mode not functioning on Wattbike Atom
Trying out a workout on the new revision of FulGaz it became apparent that the ERG mode was not being activated. The workout called for 100W for 2 minutes. FulGaz did not alter the Wattbike resistance to match the power required by the workout.
I could manually achieve the wattage required by changes in cadence and gear but it wasn’t functional automatically. I think I had all the correct boxes ticked on the settings, and also tried changing some and repeating the ride but no change.
After the update I had to insert all my settings (weight, weight of the bike, ftp…). When I started the interval workout the ftp was 200 even though I selected 280 in the settings. The video was lagging the whole time despite downloading it beforehand. I even deleted fulgaz once and reinstalled it on my computer. I also tried it on the iPad with the same issues. At the moment, Fulgaz is not possible for any workouts.
Please bring back the old version quickly or fix the issues. Paying for something without being able to use it, is quite disappointing. And unfortunately, this is the second time this happend after an update.
Momo181
•
Apr 15
I was undertaking the 8 week Climbing Program and today could not successfully connect my Kickr Core. Restarted Windows 11, got an auto upgrade and now Workout rides have no power at all in the trainer. It’s as if the trainer is not connected. Also, the climb profile is visible at the top which was never the case on workouts. Very disappointed it’s now totally broken.
This request was merged into another request
Comments23
Klem (FulGaz)
May 4
PinnedHi all. The issue with ERG Mode during workouts should be resolved in the very latest software update, but I’ve had varying report of success.
Could you please check to ensure you are on the latest version, then give this a test when you have time. Please leave a comment on the new Featurebase report if ERG Mode still does not work for you:
https://fulgaz.featurebase.app/p/erg-mode-reports-that-erg-still-not-functional-706
I will keep looking into this one if needed. Thanks again for your support. - Klem
Momo181
May 4
Just how would I access that version in order to test it? I have a Windows 11 setup.
Thirza
May 5
Android version 7.0.6. here, but still workouts do not work as they should. FTP stays stuck at 200 and ERG mode does not work, Watts stick around 30.
Tried reentering weight, ERG settings and FTP and such, but no effect.
I mostly ride workouts, so this makes me really sad… I understand you guys are working hard on this, but is getting very very frustrating…
Eastcoaster
Apr 13
My experience is very similar to Wxman.
I had to manually re-enter my weight, FTP and check off a few boxes such as ERG mode and disable ride profile during workouts. Not a big deal but when I went to do a Keen FTP workout, the FTP defaulted to 200 watts and the ERG mode didn’t seem to be responsive. The workout started at 30 watts and despite multiple intervals which should have changed the wattage it remained at 30 watts.
I looked over all the settings, shut down and started up the app again, in the end I gave up and did a ride instead of a workout.
loftsgor
Apr 15
Same here. Stuck at 30w. Gave up and did a ride. I do workouts most of the time, so this is big loss. Would love to rollback the update if possible.
Hermino Katzenstein
Apr 14
Same here.
Pls fix it asap.
thx
Eastcoaster
Apr 15
Tried again today this time FTP beginner rather than FTP keen workout but sadly no difference ERG mode isn’t working. Hopefully it will get fixed soon. Did a ride instead.
Liam Thurston
Apr 15
This has also happened to me. Using a Wahoo Kickr core. Please fix
KS Wxman
Apr 13
•Merged request
•1 vote
7.0.5 bug
Attempted to do one of the Keen FTP workouts. It initially shows the my FTP number with the horizontal white line in the preview, but when the ride actually stated the FTP number is way higher. It is also NOT doing the ERG mode, and could do any combo of watts/cadence in the training ride.
Any way to roll back until this gets fixed?
ZimZam
Apr 13
Maybe the code is looking for “EGR” instead of ERG. The setting has it as EGR. Hopefully it is something this simple. 😁
Jo M
Apr 14
•Merged request
•1 vote
Workout ride not working since update
I regularly ride the Mt Martha workout but after the update the FTP is defaulting to 200 even after I changed it in my workout settings and ERG mode is not working properly. I had to abandon the workout as the resistance was only at 35W despite the workout wattage being much higher. In summary, neither FTP or ERG mode is working for me on this workout.
StevieB 🏴
Apr 15
•Merged request
•1 vote
7.0.5 iPad iOS - Erg mode not functioning on Wattbike Atom
Trying out a workout on the new revision of FulGaz it became apparent that the ERG mode was not being activated. The workout called for 100W for 2 minutes. FulGaz did not alter the Wattbike resistance to match the power required by the workout.
I could manually achieve the wattage required by changes in cadence and gear but it wasn’t functional automatically. I think I had all the correct boxes ticked on the settings, and also tried changing some and repeating the ride but no change.
Urs
Apr 15
•Merged request
•3 votes
Major issues with Workouts, FTP and Videos
After the update I had to insert all my settings (weight, weight of the bike, ftp…). When I started the interval workout the ftp was 200 even though I selected 280 in the settings. The video was lagging the whole time despite downloading it beforehand. I even deleted fulgaz once and reinstalled it on my computer. I also tried it on the iPad with the same issues. At the moment, Fulgaz is not possible for any workouts.
Please bring back the old version quickly or fix the issues. Paying for something without being able to use it, is quite disappointing. And unfortunately, this is the second time this happend after an update.
Momo181
Apr 15
I was undertaking the 8 week Climbing Program and today could not successfully connect my Kickr Core. Restarted Windows 11, got an auto upgrade and now Workout rides have no power at all in the trainer. It’s as if the trainer is not connected. Also, the climb profile is visible at the top which was never the case on workouts. Very disappointed it’s now totally broken.